| Type: |
single-beam
filter photometer
|
|
| Light
Source: |
Halogen
lamp - 6 V, 10 W |
| Wavelength: |
340
nm - 900 nm |
| Wavelength
Selection: |
Manual
filterwheel with 6 positions:
5 standard interference filters: 340 nm, 405 nm,
492 nm, 546 nm, 578 nm
1 position for optional filter of choice |
| Photometric
Range: |
0-2.5
Bel |
| Cuvette
System: |
Suction
cuvette with sample volume 500 µl or normal
standard cuvettes (macro or semi-micro, disposable
or special optical glass) |
| Temperature
Control: |
Electric heating
of the cuvette compartment, temperature variable,
pre-adjusted to 30 °C and 37 °C
|
| Suction
System : |
Built-in
suction pump with external waste bottle |
| Reaction
Volume: |
500
µl per test |
| Operator
Interface: |
Keyboard
with 20 keys for direct functions and numeric entries
|
| Data
Presentation: |
LCD
display: 2 lines of 16 characters each, easy to
read and offering simple user guidance |
| Integrated
Printer: |
Dot-matrix
printer, 24 characters per line |
| Memory: |
General
operating software contained in EPROM (2 language
versions and capacity for 180 pre-programmed testvariants).
Up to 160 tests can be stored in RAM. |
| Signal
Port: |
Serial
port for connection to a computer (bidirectional
interface)
Modes for remote control or EDP |
| Measurement
Procedures: |
·
Absorbance, Transmission
· Endpoints with factor or standard,
with or without reagent blank and/or sample blank
· Fixed time with factor or standard,
with or without reagent blank
· Nonlinear calculations based on
polynomials of 4th degree |
| Measuring
Time: |
·
Kinetic: variable from 3-28 deltas, time per delta
>= 4 sec
· Fixed time: variable from 5-300 sec in
1 sec steps |
| Delay
Time: |
Programmable
in 1 sec steps |
| Dimensions: |
Length
33 cm x width 34 cm x height 18 cm |
| Weight: |
8.5
kg |
| Certificate: |
The
device complies with the safety rules of DIN EN
60601-1.
This was checked and certified byPrüf- und
Zertifizierstelle für Medizinprodukte derTechnischen
Universität Berlin |
|
| |
